How To Reconnect Zmodo Camera To Wifi

If your Zmodo photographic camera won't connect to WiFi, then follow this guide to fix the issue speedily. You need to fix this problem equally soon as possible because the Zmodo camera needs WiFi to become the live stream, motility detection, and other phone alerts.

To fix a Zmodo photographic camera non connecting to WiFi, yous should make certain the WiFi connexion works and meets all the requirements. Most of the time, the issue is related to the frequency that the camera is using, more specifically the router'due south WiFi may be operating at 2.4Ghz and 5Ghz and the camera is trying to connect to the incorrect SSID.

In other words, the camera is operating on 2.4Ghz frequency but information technology's connecting to the 5Ghz SSID (which is the wireless name). Follow the troubleshooting tips beneath to fix the issue.

Zmodo photographic camera can't connect to the internet (WiFi)

In 90% of the cases, this problem with the Zmodo camera happens if you are using a dual-band router. That means the router offers two WiFi signals, 2.4Ghz, and 5Ghz. Your camera may only be able to connect to 2.4Ghz and not 5Ghz (or vice versa), so it can get stuck attempting to connect to both frequencies of your dual-band router.

To ready the issue of the Zmodo photographic camera not connecting to the cyberspace just rename the separate SSDI's (WiFi name) then y'all tin can differentiate between them. Follow the steps.

Access your router settings (usually by typing the IP address of the router on the web browser and log in with your username/password).
Locate the WiFi menu.
If your router is dual-band, you should see two WiFi names there (one is 2.4Ghz, the other one is 5Ghz). Rename each of the SSID using unlike names. For example, rename the first one "MyWiFi2.iv" and the other one "MyWiFi5".
Salvage the settings. Additionally, brand sure your router is using the WPA or WPA2 for the encryption style.

Let'southward assume that you take a Zmodo photographic camera that works on two.4Ghz only. Since we renamed both WiFi names of the router, you tin connect the camera directly to the 2.4Ghz signal which above we renamed every bit "MyWiFi2.4". Connect to it and the camera will start to work, no more than failed connection.

Zmodo camera doesn't accept the WiFi password

Hither'due south an outcome with some of the Zmodo cameras: they don't accept WiFi passwords that are more than thirteen characters long. Let'due south say your WiFi countersign contains 20 characters, if you enter information technology on the Zmodo camera app, it won't connect.

It's a weird issue simply it happens. The newer Zmodo models have this trouble fixed, but not some of their camera models. There's no fix for this, all you lot have to practise is to change the countersign of your WiFi and apply one that contains less than xiii characters.

Troubleshoot the WiFi setup (of Zmodo cameras)

Cheque if the WiFi signal is working in the offset place. Maybe the photographic camera can't connect because the WiFi doesn't work at all. Effort to connect to the WiFi using your phone, or a computer, or any other device only to ensure that the internet works.

If information technology seems that the other devices connect fine to the cyberspace, and then reboot the router and endeavor again. Sometimes rebooting a device tin can practise wonders.

Next check the WiFi strength, the bespeak must exist stiff to cover your Zmodo camera. At the same time, brand sure the camera is non far away from the router and that information technology'south within the nominal coverage. You can bring the camera closer just to run into if it connects.

A few tips on how to bank check the WiFi signal strength:

Check the WiFi symbol on your phone or tablet, it's displayed on the corner of the screen, and brand sure all the bars are filled. The more confined, the stronger the internet.
Download apps as NetSpot, WiFi Analyzer, or Wireshark to test out the WiFi signal's strength.

For some smartphones, you will need to disable your 3G/4G LTE data connection during setup. In one case yous have configured your device, you tin can re-enable your 3G/4G LTE information connection.

If the Status Light is blinking green on the camera, try removing special characters and spaces from the SSID (WiFi network name) like "?" or "!". Likewise, make sure the app and the camera are updated to the latest firmware versions.

If the WiFi is okay but you're notwithstanding having issues, follow the steps below to troubleshoot your router for the SmartLink setup.

Access your wireless router settings.
Detect the tab or settings for the Wireless.
Find the option called Wireless Network Mode.
Set the wireless network mode of your 2.4GHz wireless network to 802.11b merely, 802.11g simply, or 802.11b/g just.
Retry the SmartLink setup (or any Zmodo phone app that you're using) from your smartphone while connecting to this network.
After the phone app successfully connects your wireless device to the WiFi network, you tin change your settings dorsum to their original value. The wireless device will automatically connect to your network.

Determination

Zmodo camera not connecting to the WiFi is most of the time related to dual-band routers and you lot need to rename the WiFi names for ii.4Ghz and 5Ghz. That way the camera volition differentiate both signals and correct them to the right one. Leave a annotate if you can't solve the problem, or contact the manufacturer.